Contemporary Southern Home Plan with Sun Deck - 3254 Sq Ft - Architectural Designs - 65642BS

Plan 65642BS

Contemporary Southern Home Plan with Sun Deck - 3254 Sq Ft - Architectural Designs

Heated S.F.

3,254

Beds

Baths

3.5

Stories

Cars

Floor Plan

Main Level

2nd Floor

Third Level Sun Deck

Plan Details

Grand stone columns frame the front entrance of this contemporary, Southern home plan, capped by a ribbed metal roof.
A great room greets you upon entering and a rear wall of glass retracts for a true indoor outdoor living experience. The adjoining kitchen features a sizable island, walk-in pantry, and large range; creating the cooking space of your dreams.
Retreat to the master suite and find a tray ceiling overhead, along with two walk-in closets and a 5-fixture bathroom. A second bedroom across the home includes a full bath.
Two identical bedrooms can be found upstairs, each with access to a covered balcony that connects to a sun deck.
The 3-car garage extends from the front of the home, and includes additional space for lawn equipment or storage.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.