Plan 65661BS: Luxury Mediterranean Home Plan for Indoor Outdoor Living

Plan 65661BS

Luxury Mediterranean Home Plan for Indoor Outdoor Living

Heated S.F.

6,240

Beds

Baths

6.5

Stories

Cars

Floor Plan

Main Level

Plan Details

Easily move between the indoor gathering spaces and covered lanai with this luxury, Mediterranean home plan, which features retractable glass walls on the rear elevation.
The gourmet kitchen hosts an oversized island, walk-in pantry that serves as a spice kitchen, and a large range. The formal dining room off the foyer and a breakfast nook provide multiple dining options.
The den and exercise rooms offer quieter spaces for personal growth and relaxation, while large service areas can accommodate even the most active families.
A master suite resides on either side of the design; one includes a safe room in the master closet. Three additional bedroom suites are sprinkled throughout the plan.
A double garage protrudes from each side of the front elevation, creating a parking courtyard for family and guests.
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.