Outdoor Living-Friendly Transitional House Plan - 3061 Sq Ft - 65742BS

Plan 65742BS

Outdoor Living-Friendly Transitional House Plan - 3061 Sq Ft

Heated S.F.

3,061

Beds

3 - 4

Baths

3.5

Stories

Cars

Floor Plan

Main Level

Plan Details

Enjoy one-level living with this transitional house plan, designed to take advantage of outdoor living with a seamless flow between the communal indoor spaces and covered lanai.
The spacious great room lives up to its name with a coffered ceiling and multi-panel door that retracts, while the cook in the home will enjoy remaining close to the conversation.
Outdoor dining, lounging, and cooking is all available on this luxurious lanai.
The master suite is privately situated on the right side of the home, next to a study, and includes two closets and an oversized shower in the 5-fixture bath.
Three bedroom suites line the opposite side, and are similar in size.
Related Plans: Get alternate versions with house plans 65625BS, 65664BS and 86018BS
BUILDING RESTRICTION: Restrictions may apply if building in Lee and Collier Counties, Florida as well as Sarasota, Florida. Please contact us with your site address to confirm.

What's Included

Elevations: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Material Labels
Floor-To-Floor Heights
Roof Slope Indicators

Floor Plans: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts:

Building Section Markers
All Electrical Outlets, Fixtures and Switching

Foundation or Slab Plan: - Drawn at 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor and Deck Joist Sizes, Spacing and Direction
Electrical Locations

Roof Design Plan: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges and Valley
Building Section Markers

Building Sections: - Drawn to 1/8″ to 1/4″ = 1’0″ Scale and Includes:

Floor-To-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections: - Drawn at 1/8″ to 1/2″ = 1’0″ Scale and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness
Insulation Type and Thickness

Miscellaneous Notes and Details:

Miscellaneous General Notes
Stairway Details (if applicable)

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required

IMPORTANT NOTE: Structural drawings, as well as heating and plumbing details, will not be included in your plan sets due to a variety of factors which include local codes, installation methods, personal preference, etc. Your building professional (contractor/builder/supplier) can, without difficulty, supply these details and specifications on your behalf.