Shingle-and-Stone Craftsman Home Plan with Angled 2-car Garage - 1848 Sq Ft - 16801WG

Plan 16801WG

Shingle-and-Stone Craftsman Home Plan with Angled 2-car Garage - 1848 Sq Ft

Heated S.F.

1,848

Beds

Baths

Stories

Cars

Photos

Floor Plan

Main Level

Bonus

3-Car Garage Option

Bonus Level - 3-Car Garage Option

Walkout Basement Version

Plan Details

This exciting Craftsman house plan with a shingle and stone exterior gives you 3 beds, 2 baths and 1,848 square feet of heated living space.
A 2-sided fireplace serves both the dining room and the family room. Columns set off the dining room from the foyer.
The family room is open to the kitchen and nook and sports a double tray ceiling. Windows look out across the lanai.
A built-in fireplace is featured on the back porch. The lanai offers more entertaining options.
The master bedroom has a brightly lit sitting area, two walk-in closets and a five fixture bath. Two bedrooms are located across the home for privacy.
A bonus room upstairs gives you 302 square feet of expansion possibilities.
Related Plans: Get a larger version with house plan 16800WG (2,091 sq. ft.; gain a media/study room in place of the workshop and reconfigure the bath between bedrooms 2 and 3). Get alternate exteriors with 16850WG (2,106 sq. ft.), 16895WG (2,091 sq. ft.) and 16896WG (2,397 sq. ft.). Get an angled front-facing 2-car garage with house plan 16852WG (1,764 square feet). And get more room and a 3-car garage with house plan 16851WG (2,847 sq. ft.), 16860WG (2,495 sq. ft.) and house plan 16863WG (2,234 sq. ft.).

Build Gallery

See and hear from existing customers with real photos, videos, and reviews.

House Plan 16801WG comes to life in North Carolina

Photos

House Plan 16801WG comes to life in Tennessee

Photos

What's Included

Floor Plans – ¼”=1’-0” scale floor plan indicating location of frame and masonry walls, support members, doors, windows, plumbing fixtures, cabinets, shelving, ceiling conditions and notes deemed relevant to this plan.
Exterior Elevations – All elevations at ¼” = 1’-0” scale in most cases. Some older designs may contain 1/8” scale side and rear elevations. Drawing will indicate overall configuration of home at each side view and make note of plate heights, roof overhangs, window header heights, roof pitches, materials used and extent to which they are used and enlargement of any details we feel necessary to explain the construction.
Building Sections – ¼” = 1’-0” building sections are included when there is no other reasonable way to indicate the volumetric/height conditions in the home. Most of this information can usually be determined from the exterior elevations.
Cabinet Elevations – 3/8” = 1’-0” scale elevations indicating configuration of cabinets, heights, widths, type of components used, cabinet material and finish, counter surfaces, appliances,
Framing Plans – ¼” – 1’-0” scale framing plans indicating size and spacing of members as well as bracing and blocking required for structural purposes. Local codes will most likely need to be consulted.
Foundation Plans – ¼” = 1’-0” scale foundation plans indicating location of structural walls, grade beams, reinforcing steel and structural columns. Consulting a local engineer is advisable as well as is analysis of soil conditions on site.
Electrical Plans – ¼” = 1’-0” scale schematic plans indicating location and types of electrical fixtures, switches, outlets, and how they are to be switched. Plans do not include circuiting or wire sizing. Plans will also include specialty items such as hose bibs, gas connections, location of a/c equipment, return air vents or other mechanical/electrical/plumbing items which need to be located.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required